OmniAccess Stellar AP1411 WLAN Access Point

Description

Product Name: OmniAccess Stellar AP1411 WLAN Access Point

Manufacturer: ALCATEL-LUCENT ENTERPRISE

Product Description

The Alcatel-Lucent OmniAccess® Stellar AP1411 is an indoor enterprise-grade 802.11ax hardware unit. It incorporates a dual-radio, tri-band selectable (non-simultaneous) architecture. This architecture does not support concurrent full tri-band operations across all three frequencies. Instead, the device activates only two bands at any given time depending on the configured operating mode. By leveraging selective access to the 6 GHz spectrum, the device mitigates channel congestion in dense deployments.

The hardware features an integrated Bluetooth 5 / Zigbee radio to facilitate corporate location analytics and smart building infrastructure. For network backhaul, the physical interface includes one multi-gigabit 2.5GE port and one standard 1GE port. It is strictly classified under Enterprise Networking / Wireless Access Points.

Key Technical Features

• 802.11ax High-Efficiency Operations: Provides full backward compatibility with legacy 802.11a/b/g/n/ac networks while enhancing high-density multi-user environments.

• Radio Dynamic Adjustment (RDA): Automatically manages operational channels and transmission power parameters to minimize radio frequency overlap.

• Advanced Cellular Coexistence (ACC): Integrates filtering hardware to minimize signal interference from commercial 3G/4G cellular networks and distributed antenna systems (DAS).

• Target Wake Time (TWT): Implements coordinated sleep schedules for client devices to lower power consumption and extend the battery lifespan of smart sensors.

• Distributed WLAN Control Architecture: Utilizes a controllerless, distributed control system paired with Unified Access protocols for consistent policy enforcement.

Technical Specifications

Architecture & Operating Modes

• Wi-Fi Architecture: Dual-Radio, Tri-Band selectable hardware configuration (non-simultaneous operational limits apply).

• Selective Radio Configurations: The system must be provisioned to run strictly within one of the following dual-radio combinations:

  • Operating Mode 1: 2.4 GHz (2×2:2) + 5 GHz (2×2:2)

  • Operating Mode 2: 2.4 GHz (2×2:2) + 6 GHz (2×2:2)

  • Operating Mode 3: 5 GHz (2×2:2) + 6 GHz (2×2:2)

• Maximum Combined Throughput: Delivers a maximum aggregate theoretical throughput ceiling up to 3.6 Gbps depending strictly on the active operating mode:

  • 6 GHz Radio Band: Up to 2.4 Gbps link rate (2SS, HE160 protocol)

  • 5 GHz Radio Band: Up to 1.2 Gbps link rate (2SS, HE80 protocol)

  • 2.4 GHz Radio Band: Up to 574 Mbps link rate (2SS, HE40 protocol)

• Wireless Protocols Supported: Supports OFDMA (Uplink/Downlink), MU-MIMO (Uplink/Downlink), BSS Coloring, Transmit Beamforming (TxBF), and packet aggregation (A-MPDU, A-MSDU).

• Modulation Configurations: Supports BPSK, QPSK, CCK, 16-QAM, 64-QAM, 256-QAM, and 1024-QAM.

Interface Configurations & Antenna Matrix

• Physical Network Interfaces:

  • 1 x Multi-Gigabit 2.5GE autosensing (RJ-45) uplink interface (Eth0) with dedicated PoE input support.

  • 1 x Standard 1GE (RJ-45) uplink interface (Eth1) (Does not support PoE input).

• Auxiliary Interfaces: 1 x USB 3.0 Type A port (5V, 500mA operational limit), 1 x Serial Console port, and 1 x Factory Reset button.

• Antenna Array: Integrated omnidirectional internal antennas featuring peak directional gains of 4.1 dBi on the 2.4 GHz spectrum, 4.5 dBi on the 5 GHz spectrum, and 4.7 dBi on the 6 GHz spectrum.

• IoT Radio Subsystem: Built-in Bluetooth 5 / Zigbee hardware featuring up to 6dBm transmit power (Class 1 specification) and -93dBm receive sensitivity.

Regulatory Spectrum & Transmission Limits

• Operating Frequency Bands: Configurable across 2.400–2.4835 GHz, 5.150–5.850 GHz, and 5.925–7.125 GHz. Individual band availability remains subject to local regulatory restrictions.

• Maximum Transmit Power: Limited by regional laws. The maximum structural limit is rated up to 25dBm total power (or 18dBm per-chain output) across the 2.4 GHz, 5 GHz, and 6 GHz spectrums.

Enterprise Security & Policy Management

• Authentication Standards: Full compliance with WPA3, WPA2, and 802.1X protocols. It supports Enterprise with CNSA option alongside Personal (SAE) security models.

• Core Encryption Framework: Implements Advanced Encryption Standard (AES) and Temporal Key Integrity Protocol (TKIP) for data transit security.

• Network Enforcement: Supports access control lists (ACLs), wireless Intrusion Prevention/Detection Systems (wIPS/wIDS), and Deep Packet Inspection (DPI) application routing via OmniVista software platforms.

Power Specifications & Worst-Case Draw

• Primary DC Power: 48V DC nominal input (+/- 5% tolerance). Direct DC lines maintain operational priority over active PoE lines if both sources supply power simultaneously.

• Power over Ethernet (PoE): Compliant strictly with the IEEE 802.3at (PoE+) power delivery standard via the Eth0 2.5GE port only. (IEEE 802.3bt standard is not supported).

• Worst-Case Power Draw: Rated at a maximum consumption of 25W under full operational load using a single input IEEE 802.3at PoE+ source.

• Scalability, Capacity Limits & Physical Footprint

  • Associated Client Limit: Hardware supports up to 1024 associated client devices per access point (actual performance and stability limits remain entirely environment and RF design dependent).

  • Network Architecture Scaling: Manages up to 255 access points inside a standalone web-managed HTTP/HTTPS cluster. Scales up to 4K individual access points when integrated with the OmniVista 2500 on-premises platform.

  • Operating Temperature Limits: 0°C to 45°C operating environment. Humidity limits must be maintained between 5% to 95% non-condensing relative humidity.

  • Physical Proportions: Dimensions are 210mm x 210mm x 40mm; total weight is 1,012g (bare hardware unit without deployment accessories or packaging).

  • Mean Time Between Failures (MTBF): Verified at 851,434 hours (97.19 years) at a +25°C operating temperature.

  • Hardware Warranty: Standard Hardware Limited Lifetime Warranty (HLLW).

Conclusion

The Alcatel-Lucent OmniAccess Stellar AP1411 is a technically precise solution for enterprises transitioning to Wi-Fi 6E without the infrastructure overhead of fully simultaneous tri-band hardware. By offering selectable dual-radio modes and an engineered 3.6 Gbps aggregate ceiling, it provides structured capacity scaling while operating within standard IEEE 802.3at PoE+ limitations. This makes it a highly sustainable upgrade for mid-to-high density corporate environments, specialized digital workspaces, and IoT-driven automation systems.

However, because multi-mode spectrum deployment depends heavily on regional regulatory domains, dynamic channel allocations, and existing software controller variants, proper hardware compliance validation is required prior to deployment.

Please reach out to our team directly to check current stock availability or request competitive pricing. Additionally, you can contact us anytime to receive an official proforma invoice tailored for your business in Bangladesh.

Contact Us: +8801737118246

Email Support: [email protected]